With the aprons veneered, its time to start thinking about my joinery. The trick to this step is twofold. I have a curved front apron, which would be almost impossible to clamp into my tenon jig, or even a vice to cut tenons by hand. And secondly, the legs meet the aprons at roughly a 5 degree angle, adding to the complexity. But as is often the case when I face this kind of challenge, the solution is a green one.
Right click to download the HD version of this video
Showing posts with label apron. Show all posts
Showing posts with label apron. Show all posts
Sunday, March 3, 2013
Thursday, January 31, 2013
Stacking the odds
In true Nakashima style, I wanted the live edge top for my hall table to dictate the size and shape of the carcass that supports is. Since the front of the table top follows a gentle curved shape, I want to match the same curve to the front apron of the table.
In my curved front writing desk project from a few years back, I used a bent lamination technique to create the curved drawer fronts. The technique works great if you don't need to cut any big joinery into the components. But to created the crescent front for this hall table, I need to build an apron that can be tenoned into the legs. Unfortunately, the big weakness of bent lamination is that if you shape or cut the piece and sever too many glue joints, you can weaken the bond.
So for this project, I decided to use a stacked lamination technique where I built up the apron structure out of four pieces of stacked maple which I will ultimately veneer with cherry to match the rest of the carcass. I originally thought I was using soft maple, but it turns out I was working with rock maple, so there was a little more elbow grease involved than I had expected. But I'm sure going to have one strong front apron!
Right click to download the HD version of this video
In my curved front writing desk project from a few years back, I used a bent lamination technique to create the curved drawer fronts. The technique works great if you don't need to cut any big joinery into the components. But to created the crescent front for this hall table, I need to build an apron that can be tenoned into the legs. Unfortunately, the big weakness of bent lamination is that if you shape or cut the piece and sever too many glue joints, you can weaken the bond.
So for this project, I decided to use a stacked lamination technique where I built up the apron structure out of four pieces of stacked maple which I will ultimately veneer with cherry to match the rest of the carcass. I originally thought I was using soft maple, but it turns out I was working with rock maple, so there was a little more elbow grease involved than I had expected. But I'm sure going to have one strong front apron!
Right click to download the HD version of this video
Subscribe to:
Posts (Atom)