You can also view my gallery at Designs en Bois.
Showing posts with label video. Show all posts
Showing posts with label video. Show all posts

Saturday, December 6, 2008

So many vises

Well I finally got weekend 7 in the bag. This is the assembly of the base, top, and the mounting of the end vise. This one is a bit long, but there' s a lot of material to cover! Enjoy.


Monday, December 1, 2008

Just checking in

Sorry for the gap in posts and video here. I do have two more weeks of video to edit, I've just been busy with the holidays starting. I also ran into a problem with the cut list in the magazine article that has set me back a bit (if you're building the bench, read this!). It turns out the length specified for the tool tray bottoms is an inch too short in the cut list (I verified this with the sketchup drawing). I had to modify my tool tray lengths because my bench is shorter in length (72") but I applied the same 2" differential between the sides and bottoms that the cut list describes. The difference should be only 1". So I had to re-mill my bottoms but was out of 4/4 stock. I ended up laminating QS pieces of 8/4 stock together, so in the end my box bottoms will mirror the bench top more so there is a silver lining here. But laminating all that stock and re-milling cost me a good two days on the project. But I still hope to finish up next weekend, and hopefully get caught up on video. I've talked to several people now who are planning to build this bench, so hopefully this blog will be a helpful resource for all of you.

Tuesday, November 18, 2008

Finally fitting some joints!

I have a 3 week backlog of video, but managed to get week 5 knocked out. In this episode, I finish fitting the wedged tenons, glue up the base side assemblies, and knock in my tenon wedges. This is also the first episode where I make use of the bandsaw (nice plug for Rikon here). Week 5 1/2 and 6 will both focus on the construction and fitting of the dovetail lap joints, at which point I will have a working bench ready for vises and dog holes. Enjoy, and look for more video probably later this week.